Replacement packs, upgrades and chargers

Electric Motorbike Batteries & Chargers

An electric motorbike battery is the most expensive component on the bike, and we supply and fit replacement packs, range upgrades and matching chargers for road and dirt e-motos from our Melbourne workshop.

Battery and Charger Help

Tell us the make, model and battery symptoms you are seeing, and we will advise on checks, replacement or chargers.

✓

Capacity Tested First

✓

Chargers Matched to Packs

✓

Replacement and Upgrades

Technician working on electric motorbikes in a home garage workshop

Power systems

Replacing or upgrading the pack and charger

When range drops, the bike cuts out under load or a pack has been damaged, replacement or upgrade is the next question. We help you choose between a like-for-like pack and a higher capacity option, check that the controller, wiring and charger suit the new battery, and fit it properly. Pairing the wrong charger or pack with a bike can cause poor performance or safety problems, so compatibility is the first thing we confirm. Assessing an ageing pack is a separate service, so this page covers replacement, upgrades and charging hardware.

Matched components. Voltage, connectors, controller limits and charger output all have to agree.

Fitted and tested. Packs are mounted securely, connections checked and the bike test-run after installation.

Chargers sorted. Standard, fast and spare chargers selected to suit how and where you charge.

Gloved technician testing an electric motorbike battery module with a multimeter

Electric motorbike battery replacement and range upgrades

If your electric motorbike battery has lost range, sags under throttle or has been damaged, we can replace it. The fix may be a new pack of the same specification, or a move to a higher capacity unit that fits the same frame. Before you commit we explain what changes with each choice, including weight, range and whether your controller can handle the extra output, and we supply the pack you decide on.

Many riders ask us for a bigger pack to stretch range, and upgrades are popular for longer trail days. A 72v battery changes how a bike delivers power compared with lower voltage systems, and it only suits machines designed for it. If you want a Sur-Ron battery, tell us the exact model and we will confirm it against the controller before you order, then fit it at our workshop so the whole job is handled in one place.

We supply spare and faster chargers that match your pack's chemistry, voltage and connector, because the charger affects how long the pack lasts. We can also advise on a safe charging spot at home with suitable power and ventilation. Packs and chargers can be freighted Australia-wide, and fitting is done at our Melbourne workshop. Call 0438 690 440 with your bike's model and we will check what suits it before you order anything.

Fitting Steps

What to expect when we fit a battery or charger

01

Compatibility first

We confirm voltage, connectors, controller limits and mounting before anything is ordered.

02

Careful installation

Packs are secured, wiring is routed away from heat and sharp edges, and every connection is checked.

03

Charging advice

We explain how to charge, store and care for the new pack so that it keeps its performance for as long as possible.

Battery Help

Fitting for riders around Melbourne

Riders bring packs and bikes to our Melbourne workshop from across the metro area, and we freight batteries and chargers elsewhere. Here are some of the suburbs they come from.

Battery FAQs

Battery and charger questions

The questions riders ask before swapping a pack or buying a charger.

When should an electric motorbike battery be replaced?
When range has dropped well below what it used to deliver, the bike cuts out under load, the pack has swelling or damage, or it will not hold charge. Safety concerns such as physical damage mean you should stop using the pack and ask us.
Sometimes. It depends on the frame space, the controller’s voltage and current limits and the wiring. We check these before recommending an upgrade, and tell you honestly if a larger pack is not a good idea for your model.
Not automatically. Higher voltage systems change power delivery and need a controller and motor designed for them. Swapping voltage on a bike that was not built for it can cause damage, so we check before recommending anything.
No. The charger must match the pack’s voltage, chemistry and connector, and its output should suit the battery. A poor match can reduce battery life or create safety risks. Ask us before buying a replacement.
Yes, we deliver batteries and chargers Australia-wide. Fitting happens at our Melbourne workshop, so riders elsewhere usually receive the part and arrange fitting locally or freight the bike in.

Ask us about a battery or charger

Send your bike's make, model and symptoms, and we will confirm a pack or charger that matches your controller.